Convertible Top Compartment Cover Lock

Convertible Top Compartment Cover Lock

Removing





- Bring convertible top into center position.

- Remove convertible top compartment well front trim.

- Mark position of Convertible Top Compartment Cover Locking Motor (V222) before removal.

- Remove securing spring from ball socket and press push rod of ball stud (version 1) or remove securing clips and press push rods from guide pins (version 2).

- Disconnect electrical connector.

- Remove screws - arrows -.





- Remove Convertible Top Compartment Cover Locking Motor (V222)/Convertible Top Compartment Latch Switch (unlock) (F293).

Installing

- Secure motor according to markings applied earlier and tighten bolts.

Tightening torque => [ Convertible Top Compartment Cover Latch Assembly Overview ] Convertible Top Compartment Cover Latch Assembly Overview.