Diagram 49/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Heated Oxygen Sensor (HO2S) with US equipment





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G39 - Heated Oxygen Sensor (HO2S) Locations Heated Oxygen Sensor -G39- / Oxygen Sensor Heater -Z19-

G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

J623 - Engine Control Module (ECM) Control Modules in Front Part Of Vehicle

SB21 - Fuse 21 (on fuse panel B) Overview Of Fuses

T4b - 4-Pin Connector, black, on oxygen sensor (O2S) behind three way catalytic converter (TWC)

T6c - 6-Pin Connector, black, on oxygen sensor (O2S) before three way catalytic converter (TWC)

T40 - 40-Pin Connector, black, on electronics box engine compartment (Connector J)

T94 - 94-Pin Connector, black (Connector B)

Z19 - Oxygen Sensor (O2S) Heater Locations Heated Oxygen Sensor -G39- / Oxygen Sensor Heater -Z19-

Z29 - Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC) Locations Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

(D113) - Connection 11 (in engine compartment wiring harness)

*** - Only models with US equipment

Previous Diagram 49/12 (Tracks 141-154)

Next Diagram 49/14 (Tracks 169-182)