Windshield Wiper Fluid Reservoir Upper Section and Power Steering Fluid Reservoir

Windshield Wiper Fluid Reservoir Upper Section and Power Steering Fluid Reservoir

Procedure





- Remove nut - 1 - and screws - 4 - and - 5 -.

- Remove the vent hose - 2 - from the windshield washer fluid reservoir upper section - 3 -.

- Remove the windshield washer fluid reservoir upper section and move the power steering fluid reservoir to the side - 6 - with hydraulic hoses still connected.

Install in reverse order of removal, observing the following:

• Clean screw threads installed with locking compound using a wire brush. Then insert screws with locking compound.

• Threaded holes that had self-locking screws or screws installed with locking compound must be cleaned (. with a thread tap). Otherwise screws may shear off when reinstalled.

Install in reverse order.

Tightening Specifications