Telematics Antenna Splitter, Avant

Telematics Antenna Splitter, Avant

CAUTION!
• Switch off all electrical components.

• Switch ignition off and remove ignition key.

Removing:

- Remove A-pillar trim:.

- Remove front passenger's seat.

• Seat belt need not be removed from seat frame.

- Pull back floor carpet..

- Release cover for electronics box - arrows - and remove.





- Open lid - 1 - of mounting box - 2 - in direction of - arrow -.





- Disconnect antenna cable connections and remove splitter.

Installing:

Install in reverse order of removal, noting the following:

• Ensure correct seating and fit of electrical connections.

• Antenna connections (couplings) must be properly aligned and tight to ensure proper reception.