01J,0AN Transmission

Cleaning Selector Shaft

• Observe general repair notes => [ General Repair Information ] General Repair Information.

• Rules of cleanliness for working on automatic transmissions => [ Clean Working Conditions ] Clean Working Conditions.

Procedure

- Remove end cover.

- Remove Transmission Control Module (TCM) (J217 ) => [ Transmission Control Module ] 01J,0AN Continuously Variable Transmission.

- Clean catch - arrow - of selector shaft. Do not use fluffy materials for cleaning. Clean contact surfaces of magnet especially thoroughly of metal shavings and the like.





• Make sure that spring - A - and roller - B - are secured properly.

- Check roller - B - and spring - A - for damage; replace if necessary.

- If necessary, clean sensors - A -, - C - and - D - of contamination and metal shavings.





- Install Transmission Control Module (TCM) (J217 ) => [ Transmission Control Module ] 01J,0AN Continuously Variable Transmission.

- Install end cover.