Front Bumper Crossmember

Front Bumper Crossmember

- Bumper removed.

- Remove signal horn - 4 -.

- Disconnect hose - 5 - of headlamp cleaning system on both sides (press release buttons).





- Unscrew bolts - 3 - of right spray jet for headlamp cleaning system - spray jet remains installed.

- Remove bolts - 1 - (qty. 5).

- Pry off retaining clips - 2 - (qty. 3).

- Swivel spray jet for headlamp cleaning system to the side and remove crossmember from bumper cover.