01V,01VA Transmission

Shift Lock Solenoid

Removing

- Remove cover for shift mechanism. Refer to => [ Shift Mechanism Cover ] Shift Mechanism Cover.

- Disconnect electrical harness connector on Shift Lock Solenoid (N110).

- Release the logs and remove the Shift Lock Solenoid (N110) - arrows -.





Installing

Install in reverse order, paying attention to the following:

- Press shift lock solenoid into guide until it engages; operating lever - 2 - of solenoid must engage in locking lever - 1 - on shift mechanism.





- Install cover for shift mechanism. Refer to => [ Shift Mechanism Cover ] Shift Mechanism Cover.