01V,01VA Transmission

Ignition Switch Key Lock, Checking

- Turn ignition key to run position (ignition on).

- Press and hold brake pedal.

• When button in selector lever handle is pressed it must be possible to move selector lever out of position "P" without "catching ".

• It should not be possible to remove the ignition key when the selector lever is in any other position than "P".

- Place selector lever in position "P".

• It must be possible to move ignition key to removal position without " sticking".

- Pull out ignition key.

• Selector lever cannot be shifted out of "P" position with button pressed and brake pedal depressed.

• If the ignition key removal lock does not function as described, locking cable must be adjusted.