Evaporative Emission Control Canister: Service and Repair

EVAP Canister

• Checking for leaks. Refer to => [ Leak Detection Test, Performing ] Leak Detection Test, Performing.

Removing

Observe safety precautions. Refer to => [ Safety Precautions ] Fuel Supply System.

Observe rules for cleanliness. Refer to => [ Clean Working Conditions ] Fuel Supply System.

- Remove EVAP canister cover - arrows - at bottom of spare wheel well.





- Remove sealing pieces above vent lines.

- Disconnect the hose connection - 1 - at the vent line.





• For vehicles with EVAP filter => [ EVAP canister - vehicles from 11/2004 ] Service and Repair

- Separate the vent lines - 2 - and - 3 -. Do this by pressing the releasing ring - 4 - in direction - arrow A - and simultaneously pulling the vent line off - arrow B -.

- Remove stud bolts - arrows - and remove EVAP canister.

Installing

Installation is in reverse order of removal, note the following:

• Secure all hose connections using hose clamps appropriate for the model type.

Tightening Specifications