End Output (Function 06)

Diagnostic Trouble Code (DTC) Memory, Erasing And End Output (Functions 05 And 06)

Requirement
- DTC memory checked

Erase DTC Memory (function 05)
- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display

Rapid data transfer Q
05 - Erase DTC Memory

- Press -Q- button to confirm input.

Indicated on display

Rapid data transfer Q
DTC Memory is erased

- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX

NOTE:
- If the text shown opposite appears on the display, the test procedure has not been performed correctly.
- Follow the test procedure exactly:
- Check DTC memory.
- Repair any malfunctions and check DTC again.
- Erase DTC Memory.
- If for example, the ignition was switched off between checking and erasing DTC memory is not erased (check DTC memory once again).

End Output (function 06)

NOTE: DTC memory has been checked and erased, basic setting has been performed, and the coding has been checked.

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -6- to select "End Output" function 06.

Indicated on display

Rapid data transfer Q
06 - End Output

- Press -Q- button to confirm input.

Indicated on display

Rapid data transfer HELP
Insert address word XX

- Switch ignition off and disconnect Data Link Connector (DLC).