P0713

DTC 17097 / P0713





4) The transmission fluid temperature sensor -G93- is integrated in the Transmission Control Module (TCM) -J217- and can only be replaced as a unit with the Transmission Control Module (TCM).
5) The Measured Value Block should be read out when the engine and transmission have cooled (approximately room temperature). If the temperature reading is then higher than or equal to 160°C, the transmission fluid temperature sensor -G93- is clearly faulty.

Note on DTC 17097 / P0713:
^ Condition for DTC recognition: The temperature reading measured has exceeded 160°C.