Passenger's Side Vent Removal/Installation

Passenger's Side Vent Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; call 888-424-6857

NOTE:

- Take care not to scratch the dashboard or the panels.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the glove box Glove Box Removal / Installation.

2. Remove the screw (A) securing the duct (B) from the glove box opening. Remove the screws (C) securing the passenger's side vent (D).






3. Pull out the passenger's side vent (A) to detach the clip, then remove it.





4. Install the vent in the reverse order of removal, and note these items:

- If the clip is damaged or stress-whitened, replace it with a new one.
- Push the clip into place securely.