Driver's Side Vent Removal/Installation

Driver's Side Vent Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; call 888-424-6857

NOTE:

- Take care not to scratch the dashboard or the panels.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the driver's dashboard trim Driver's Dashboard Trim Removal/Installation.

2. Remove the screw, and detach the clip, then remove the driver's side vent (A).





3. Install the vent in the reverse order of removal, and note these items:

- If the clip is damaged or stress-whitened, replace it with a new one.
- Push the clip into place securely.