Front Engine Mount Removal/Installation

Front Engine Mount Removal and Installation

Removal

1. Remove the engine compartment covers Service and Repair.

2. Remove the front warm up TWC.

3. Remove the front engine mount stop (A), then remove the front engine mount bolt (B).






4. Remove the front engine mount mounting bolts (A).





5. Lift and support the engine with a jack and a wood block under the engine/transmission.

6. Remove the front engine mount and disconnect the vacuum hose (B).

NOTE: A/T model: Do not bend the ATF cooler pipe when removing the front engine mount.

Installation

1. Connect the vacuum hose (A), then align the front engine mount with its mounting holes and install the new front engine mount mounting bolts (B).

NOTE: A/T model: Do not bend the ATF cooler pipe when installing the front engine mount.





2. Remove the jack and the wood block.

3. Tighten the new front engine mount bolt (A), then install the front engine mount stop (B) using new nuts.





4. Install the front warm up TWC.

5. Install the engine compartment covers Service and Repair.