Fluid Line/Hose: Service and Repair

ATF Cooler Hose Replacement

Exploded View With SH-AWD





NOTE: When installing the hose clamps, make sure not to interfere with the surrounding parts.

1. Install the ATF cooler hoses over the ATF cooler lines with the clips at the appropriate points in reference to the following list. Align the paint mark (I) to the driver's side, and the white paint marks (J) to the passenger's side.





2. Secure the ATF cooler hose with the clamps (K) at the white paint line (L), then align the ATF cooler hose clamps (M) to the white paint line (N) in the direction shown.

3. Refill the transmission with ATF to the proper level. ATF Replacement