Alarm Module: Service and Repair

Immobilizer-keyless Control Unit Replacement

1. Remove the steering column covers. Service and Repair

2. Disconnect the 7P connector (A) from the immobilizer-keyless control unit (B).

3. Remove the two screws and the immobilizer-keyless control unit.

4. Install the immobilizer-keyless control unit in the reverse order of removal.

5. After replacement, register the immobilizer-keyless control unit, Programming and Relearning and make sure the immobilizer system works properly.

6. Program all of the client's keys/keyless transmitters. Programming and Relearning