Fuel Pressure Regulator: Service and Repair

Fuel Pressure Regulator Replacement

With SH-AWD

1. Remove the fuel tank unit. Fuel Tank Unit Removal and Installation

2. Remove the bracket (A).

3. Remove the pressure regulator (B).

4. Install the parts in the reverse order of removal with new O-ring (C). When installing the fuel tank unit, align the marks on the fuel tank unit and the fuel tank. Fuel Tank Unit Removal and Installation
NOTE:

- Coat the O-rings with clean engine oil; do not use any other oil or fluid.

- Do not pinch the O-rings during installation.

- Use all the new parts supplied in the pressure regulator replacement kit.