Instrument Fascia Removal/Installation

Instrument Fascia Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program.

NOTE:

- Take care not to scratch the trim or the panels.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove these items:
- Driver's dashboard trim Driver's Dashboard Trim Removal/Installation

- Driver's center trim Dashboard Center Trim Removal/Installation

2. Tilt the steering column fully down, and move the steering wheel all the way out.

3. Detach the clips and the hooks (A) fastening the instrument fascia (B) from the upper column cover (C).






4. Gently pull out the bottom to release the clips, and remove the instrument fascia (A).

5. Install the instrument fascia in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips and the hooks into place securely.