Driver's Side Vent Removal/Installation

Driver's Side Vent Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program.

NOTE:

- Take care not to scratch the dashboard or the panels.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the driver's dashboard trim. Driver's Dashboard Trim Removal/Installation

2. Remove the screw, and release the clip securing the driver's side vent (A), then remove the vent.

3. Install the vent in the reverse order of removal, and note these items:
- If the clip is damaged or stress-whitened, replace it with a new one.

- Push the clip into place securely.