Cylinder Head Cover Removal

Cylinder Head Cover Removal

Front

1. Remove the intake manifold. Intake Manifold Removal and Installation

2. Remove the three ignition coils from the front cylinder head. Service and Repair

3. Disconnect the exhaust recirculation (EGR) valve connector (A) and remove the harness holder mounting bolt (B) and the harness clamp (C).

4. Remove the harness holder (D) from the bracket.






5. Remove the front cylinder head cover.






Rear

1. Remove the strut brace. Service and Repair

2. Remove the intake manifold. Intake Manifold Removal and Installation

3. Remove the three ignition coils from the rear cylinder head. Service and Repair

4. Remove the harness holder mounting bolts (A) and the engine ground cable (B).

5. Disconnect the three injector connectors (C) and the two harness clamps (D).

6. Remove the harness clamp (E) and disconnect the breather hose (F).

7. Remove the harness (G) from the upper cover.

8. Remove the engine hanger bracket (H).






9. Remove the harness holder mounting bolts (A) and disconnect the knock sensor connector (B) and the camshaft position (CMP) sensor connector (C).






10. Remove the rear cylinder head cover.