Power Mirror Replacement

Power Mirror Replacement

1. Remove these items:
- Front door panel Front Door Panel Removal/Installation

- Front door sash inner trim Front Door Sash Inner Trim Replacement

2. Disconnect the connector (A).

3. While holding the mirror (B), remove the nuts securing the mirror.






4. Release the catch (A) from the hole in the door, then remove the mirror (B). Take care not to scratch the door.

5. Install the mirror in the reverse order of removal, and note these items:
- Make sure the connector is plugged in properly.

- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips on the cover into place securely.