DTC 52

DTC 52: Motor Stuck OFF
1. Check the No. 10 (30A) fuse in the under-hood fuse/relay box, and reinstall the fuse if it is OK. Is the fuse OK?
YES - Go to step 2.
NO - Replace the fuse, and recheck.
2. Disconnect the ABS control unit 25P connector.





3. Measure the voltage between the ABS control unit 25P connector terminal No. 9 and body ground.
Is there battery voltage?
YES - Check for loose terminals in the ABS control unit 25P connector. If necessary, substitute a known-good ABS modulator-control unit, and recheck.
NO - Repair open in the wire between the No. 10 (30A) fuse and the ABS control unit.