DTC 6-1

Front Fail-safe Relay Diagnosis. (Part 1 Of 3):

Front Fail-safe Relay Diagnosis. (Part 2 Of 3):

Front Fail-safe Relay Diagnosis. (Part 3 Of 3):

CONDITIONS
The Anti-lock Brake System (ABS) control unit monitors the voltage from the battery for the six solenoids during the initial diagnosis when the fail-safe relays are OFF.The ABS control unit keeps the ABS indicator light on if it detects battery voltage at the front solenoid circuits.

POSSIBLE CAUSES
- Front fail-safe relay stuck ON.
- Short to power in the solenoid drive circuits between the front fail-safe relay and ABS control unit.