Procedures

End pipes




























INTRODUCTION
- Read through all of the instructions before starting installation.
- Notifications and warning texts are for your safety and to minimize the risk of something breaking during installation.
- Ensure that all tools stated in the instructions are available before starting installation.
- Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
- In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.







End pipes





- Clean the silencer's end pipes.





- Ensure that the marked areas around the pipes, where the clamp for the end pipes is to be tightened, is clean.





- Insert the end pipes on the silencer's pipe.





- Install the clamp from the kit, take the screws and loosely tighten the end pipes.
- Adjust the clamp so that it is properly secured in the recesses in the silencer pipes.
- Secure the end pipes. Tighten the screws to 24 Nm (18 lbf.ft.).