FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Volvo >> 2013 >> XC90 R Design AWD L6-3.2L VIN 95 B6324S5 >> Repair and Diagnosis >> Accessories and Optional Equipment >> Radio, Stereo, and Compact Disc >> Testing and Inspection >> Component Tests and General Diagnostics >> Checking Radio Reception

Checking Radio Reception







Checking radio reception

Fault-tracing information
Troubleshooting analyses have shown that poor AM/FM-reception may be due to several causes. To perform correct action, troubleshoot first according to the following:
1. Inform the customer that it is normal for the radio signal to have interference from e.g.:
- Electrical wiring.
- Bridges.
- Tunnels.
- The vehicle is indoors, such as in a garage for example.
- The vehicle is in the broadcasting station's outer coverage area.
1. Other causes that may interfere with the radio signal are as follows:
- The customer has connected external devices such as chargers, electric coolers, etc., in the 12-volt socket.
- Sun visor film with metal has been fitted on windows with antenna pattern.
- The heating coil in the rear window is damaged.
1. Check if there are diagnostic trouble codes set for integrated audio module (IAM) or Audio module (AUM) (applies to S60 07-) and primarily follow the instructions that each diagnostic trouble code refers to.
2. Check the cable harness and connectors. Poor radio reception may be because the antenna connectors are not connected to the window antennas. If there is no radio reception, this may be because the antenna cable is not connected to the antenna amplifier.
3. Using a torque wrench check that the screw in the antenna amplifier is tightened to the ground terminal to a torque of 10 Nm.
4. Perform a visual check of the antennas.
Replace damaged components.
If no malfunction is found:
- Replace antenna amplifier. Check the function.
- If the problem remains, replace Integrated Audio Module (IAM) or Audio module (AUM).
Other information
- Signal specification Signal Specification, Integrated Audio Module (IAM)
- Checking wiring and terminals Checking Wiring And Terminals
- Wiring diagram.
Fault symptom
- Radio/Does not work
- Radio/Interference/AM frequency
- Radio/Interference/FM frequency
- Radio/Poor reception/AM frequency
- Radio/Poor reception/FM frequency

Note! Download new software in the new control module after replacement.





Continue - DONE

-------------------------------------------------

pro multis Credits:Operation CHARM About Operation CHARM