Rain Sensor: Service and Repair

Operation number: 36642-2

Rain sensor






Removal

Note! Removal steps in this procedure may contain installation details.

























Caution! Take extra care when handling the component.

Caution! Use lint free cloth.

Note! Make sure that the component is clean and free of foreign material.

Use: Isopropanol, 1161721

Installation





Caution! Take extra care when handling the component.

Caution! Make sure that equal pressure is applied to the full length of the component.





Caution! The silicon surface must not be touched, any contamination of the surface will damage the sensor.





Caution! Make sure that the surface is clean and free of foreign material.

Caution! Use lint free cloth.

Use: Isopropanol, 1161721

Use: Window cleaner,









Note! Press the sensor for a few seconds to remove any air bubbles between the window and the sensor.









To install, reverse the removal procedure.

Perform rain sensor check Refer to: Rain sensor, check Testing and Inspection