Battery Cable To The Starter Motor Control Solenoid.

Operation number: 37213-2

Battery cable to the starter motor control solenoid.

Removal

Note! Removal steps in this procedure may contain installation details.

Perform battery disconnecting and connecting. Battery, Disconnecting

Remove the following items:
- air cleaner (ACL) housing Refer to: Air cleaner housing, B6304T4 Service and Repair
- the intake manifold Refer to: Induction pipe, B6304T4, TF-80SC AWD Service and Repair




1. Torque: Battery lead to battery lead terminal, 14 Nm

2. Torque: Starter motor B+ terminal, 15 Nm

3. Torque: Generator B+ terminal, 15 Nm









Installation

To install, reverse the removal procedure.