Description Of Frozen Values

Description of frozen values

Explanation
Frozen values are parameter values that are stored when a diagnostic trouble code (DTC) is stored.
Not all parameters can be read out for all diagnostic trouble codes. The parameter values can only be read if they can provide additional information on the prevailing conditions when the code was generated.

Total mileage, value
Measurement range: 0 - 1.000.000 km.
The value indicates the vehicle's total mileage when the Diagnostic Trouble Code (DTC) was generated.

MECU power supply, value
Measurement range 0 - 63 V.
Normal range: 12.0 - 14.5 V.
The value indicates the supply voltage to the central electronic module (CEM) when the diagnostic trouble code (DTC) was stored.

Outside temperature, value
Measurement range: -40 to +215 °C.
The value indicates the outside temperature when the diagnostic trouble code (DTC) was stored.

Power consumption Pump motor, value
Measurement range: 0 to 127.5 A.
The value indicates the pump motor's actual power consumption when the DTC was stored.

Pump motor speed, value
Measurement range: 0 to 5000 rpm.
The value indicates the pump motor's actual power speed when the DTC was stored.

Temperature in the control module, value
Measurement range: -40 to +215 °C.
The value indicates the temperature in the control module when the DTC was stored.

Power supply, value
Measurement range 0 - 20.4 V.
The value indicates the power supply to the Power Steering Control Module (PSCM) when the DTC was stored.

Vehicle speed, value
Measurement range: 0 to 255 km/h (158 mph).
The value indicates the actual vehicle speed when the DTC was stored.