Repairs and Inspections Required After a Collision: Testing and Inspection

Checking seatbelt-related components at collision

Information




After a collision it is important to check which of the seatbelt-related components in the vehicle have been activated and require replacement. This check shall only be performed if the vehicle has been involved in a collision.
- For this check to work, it must be done before resetting the SRS, i.e. before fault tracing DTC SRS-B119343.
- Only the activated components are presented in the list that the checks generate.
With battery related components the following applies:
- Seat belt tensioner shoulder height driver.
- Seat belt tensioner shoulder height passenger.
- Seat belt tensioner waist height driver.
- Seat belt tensioner waist height passenger.
- Load limiter driver.
- Load limiter passenger.
- Seat belt tensioner second row right.
- Seat belt tensioner second row centre.
- Seat belt tensioner second row left.

Note! The vehicle's equipment varies depending n market.

The checks are started by clicking the VCT2000 symbol.





Continue - FAULT FOUND

-------------------------------------------------