Description Of Frozen Values, DABM

Description of frozen values

Explanation
Frozen values are parameter values that are stored when a diagnostic trouble code (DTC) is stored.
Not all the parameters described need to be implemented in the control module. This varies from system to system.

MECU power supply, value
The value indicates the supply voltage to the central electronic module (CEM) when the diagnostic trouble code (DTC) was stored.
Measurement range: 0 -63 V.
Normal value when the generator (GEN) is charging: 13.0-14.5 V.

Total mileage, value
Measurement range: 0-1,000,000 km.
The value indicates the vehicle's total mileage when the Diagnostic Trouble Code (DTC) was generated.

Passenger compartment temperature, value
Measurement range: -40 to +215 °C.

Power supply mode
The value indicates the current status of the power supply position when the diagnostic trouble code (DTC) was stored.
- Key removed
- Key recently removed
- Key approved
- Ignition off after Accessory position
- Accessory position
- Accessory position after Ignition on
- Ignition on
- Running
- Start attempt

Global time, value
The value displays the time that has passed since the diagnostic trouble code (DTC) was stored.

Internal temperature, value
The value indicates the internal temperature in the control module when the diagnostic trouble code was stored.
Measurement range: -40 to +215 °C.