Connecting The Breakout Box, Rear Seat Entertainment Module (RSE)

Connecting the breakout box, Rear seat entertainment module (RSE)

Special tools:
951 1428 Breakout box 951 1428 Breakout box
951 1499 Cable 951 1499 Cable
951 3023 RSE ADAPTER 951 3023 RSE ADAPTER

Caution! Avoid touching control module connector pins and associated cable harness connectors. There is risk of electrostatic discharge, which could cause damage in the control module. Discharge yourself and the tools to be used by holding the metal part of the tool and at the same time touch a part of the body immediately before starting to work.

General information
Visually check the connectors to ensure that the male and female terminals are not damaged and that the cables for the female halves are properly connected.
The breakout box is designed to facilitate reading off control module output and input signals when the control module is connected as well as resistance of cables and components when the control module is disconnected. Using a breakout box reduces the risk of unintentionally short-circuiting cables or damaging connector pins.

Connecting the breakout box
- Make sure that the ignition is off.
- Connect the breakout box 951 1428 Breakout box 951 1428 Breakout box and cable 951 1499 Cable 951 1499 Cable to the adapter 951 3023 RSE ADAPTER 951 3023 RSE ADAPTER

Rear seat entertainment module (RSE)
- Unplug the connectors for rear seat entertainment (RSE), see: Rear Seat Entertainment (RSE) Control Module Rear Seat Entertainment (RSE) Control Module
- Connect the adapter 951 3023 RSE ADAPTER 951 3023 RSE ADAPTER for connector C1 on the control module.
- Connect the adapter 951 3023 RSE ADAPTER 951 3023 RSE ADAPTER for connector C2 on the control module.

Note! Before the functions in the control module can be checked and measurements taken, any removed fuses must first be reinstalled.

Other information
- For connector C1 terminals #C1 - #14 correspond to terminals #1 - #14 on the breakout box.
- For connector C2 terminals #C1 - #24 correspond to terminals #21 - #44 on the breakout box.
- For more information on signals and other values, see Signal specification, rear seat entertainment module (RSE) Sensus Signal Specification, Rear Seat Entertainment Module (RSE) Sensus
- For information about checking power supply and ground connection see: Checking the supply voltage/ground terminal Checking The Supply Voltage/Ground Terminal, Rear Seat Entertainment Module (RSE)
- For further information on fuses and grounding points, see the relevant wiring diagram.