Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PAC-U300362

Condition

Note! This trouble code is only relevant for troubleshooting and action in the following cases:

- The trouble code is active in the present driving cycle and has been active for a longer period of time.
- The customer experiences malfunction that can be attributed to the trouble code.
Parking Assistance Camera (PAC) continuously checks its own system voltage.
The diagnostic trouble code is stored if the control module detects:
- The power supply is higher than 16 V.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Loose connection or oxidation in the connections.
- Open circuit or short-circuiting on cables.
- Faulty power supply.
- Damaged Parking Assistance Camera (PAC).

Fault symptom[s]
- Park assist camera/Does not work