Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information FSM-U300098

Condition
The control modules checks internal components in the system.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The ambient temperature is greater than 70 °C.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition on for at least 5 seconds.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- The ambient temperature is greater than 70 °C.

Fault symptom[s]
- CJ, Warning lights and chimes/Bulb failure indication/no indication
- 1T, Warning lights and chimes/Front monitoring/Active safety indication/no indication
- PD, Brake pedal/Excessive "brake pedal effort" required
- IV, Text window and warning symbol/Text message
- 1S, Front monitoring/Active safety/Driver Alert Control does not work
- 1R, Front monitoring/Active safety/Lane Departure Warning does not work
- 5B, Road Sign Information (RSI)/Does not work