Fault-Tracing Information

Fault-tracing

Over heated
Allow the control module to cool and then test the function.
In the event of continued reduced function, replace the Digital Audio Broadcast Module (DABM).
Remedy as necessary.

Other information
- Component location, Remote Digital Audio Receiver (DABM) Component Location, Remote Digital Audio Receiver (DABM)





Continue - Verification

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Check that the radio is working and that the reception is acceptable.

Is the radio playing through the loudspeakers?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFIED - FAULT FOUND

VERIFICATION FAILED - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Over heated

-------------------------------------------------