Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PSCM-U300071

Condition
Power Steering Control Module (PSCM) monitors both the current and the speed of the pump motor.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The hydraulic pump motor does not start.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source

- Battery voltage too low.
- Faulty power supply.
- Damaged Power Steering Control Module (PSCM).

Fault symptom[s]
- Steering/Steering requires extra or uneven effort
- Text window and warning symbol/Yellow symbol and text message