Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information FSM-U300066

Condition
The Forward Sensing Module (FSM) checks the entire system including other control modules.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Something in the system or other control modules has repeatedly malfunctioned.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Engine running.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source

- Repeated malfunction in the system or other control modules

Fault symptom[s]
- AQ, Cruise control/Does not engage
- 1T, Warning lights and chimes/Front monitoring/Active safety indication/no indication
- CJ, Warning lights and chimes/Bulb failure indication/no indication
- PD, Brake pedal/Excessive "brake pedal effort" required
- IV, Text window and warning symbol/Text message