Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CVM-U300064

Condition
The Closing velocity module (CVM) monitors the internal functions of the control module.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Pre-loading of brake pressure requested for too long.
- Torque limiting in the engine requested for too long.
The control module's test for the diagnostic trouble code (DTC) starts when:
- The vehicle is in normal mode.
- Engine running.
- The voltage supply to the control module is 9-16 V.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- City Safety switches off.

Possible source
- Internal fault in the Closing velocity module (CVM).

Fault symptom[s]
- Front monitoring/Active safety/City Safety does not work
- Text window and warning symbol/Text message