Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-U300051

Condition
The central electronic module (CEM) checks the internal components in the control module.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Internal components do not work.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition on.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Software error.

Fault symptom[s]
- Engine fails to start