Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DABM-U300046

Condition
The Digital Audio Broadcast Module (DABM) checks the internal software in the control module.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Software error in the control module.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Start-up of the control module.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- The software is defective or changed.

Fault symptom[s]
- DP, Radio/Does not work