Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
The Suspension module (SUM) monitors the supply voltage to the control module.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Supply voltage to control module is too low.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Engine running.
- The test is carried out every other operating cycle. The Suspension module (SUM) defines an operating cycle as ignition on and ignition off.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- Deactivated Four-C function.

Possible source
- Battery voltage too low.
- Contact resistance or oxidation in the connectors.

Fault symptom[s]
- Message in information display
- Four-C function not working