Fault-Tracing Information

Fault-tracing

Erasing diagnostic trouble code (DTC)




- Ignition on.
The instructions below must be carried out in the correct order:
1. Check that the battery voltage is correct.
2. Apply parking brake.
3. Erase the diagnostic trouble code (DTC).






Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Erasing diagnostic trouble code (DTC)

-------------------------------------------------