Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information RDAR-U210100

Condition
The Remote Digital Audio Receiver (RDAR) uses settings from the vehicle configuration file in the central electronic module (CEM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The control module's configuration does not correspond with the vehicle's vehicle configuration.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- The vehicle's vehicle configuration file is incorrect.

Fault symptom[s]
- No customer symptoms.