Fault-Tracing Information

Fault-tracing

Faulty software
The control module has registered that the information about the vehicle's configuration is missing in the control module, or that it does not match the software that is downloaded in the control module.
This can be due to a fault in the Central electronic module (CEM).
Remedy the fault by loading new software into the Central Electronic Module (CEM).

Continue - Information

-------------------------------------------------

Information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Faulty software

-------------------------------------------------