Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information FSM-U210100

Condition
Forward Sensing Module (FSM) receives information about current vehicle configuration from Central electronic module (CEM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Vehicle configuration from Central electronic module (CEM) is incorrect.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Key in position II for at least 10 seconds.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source

- Fault-trace in transmitting control module.

Fault symptom[s]
- AQ, Cruise control/Does not engage
- 1T, Warning lights and chimes/Front monitoring/Active safety indication/no indication
- CJ, Warning lights and chimes/Bulb failure indication/no indication
- PD, Brake pedal/Excessive "brake pedal effort" required
- IV, Text window and warning symbol/Text message
- 5B, Road Sign Information (RSI)/Does not work
- 5A, Lane Keeping Aid (LKA)/Does not work