Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information TCM-U210000

Condition
The Transmission control module (TCM) receives information about current vehicle configuration from Central electronic module (CEM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Vehicle configuration from central electronic module (CEM) is lost.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- The diagnostic trouble code (DTC) may be stored after downloading software.
- Fault-trace the central electronic module (CEM).

Fault symptom[s]
- None.