Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PAM-U210000

Condition
Parking Assistance Module (PAM) receives information about vehicle configuration in question from central electronic module (CEM).

The diagnostic trouble code (DTC) is stored if the control module detects that:
- Vehicle configuration from central electronic module (CEM) is lost.
- Incorrect value runs longer than 10 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Fault-trace in transmitting control module.

Fault symptom[s]
- Parking Assistance System, malfunction
- Information lamp is on
- Message in information display