Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DABM-U210000

Condition
The Digital Audio Broadcast Module (DABM) uses settings from the vehicle configuration file in the central electronic module (CEM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Vehicle configuration file not obtained from central electronic module (CEM).
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- The vehicle's configuration is not obtained.

Fault symptom[s]
- DP, Radio/Does not work