Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-U201495

Condition
The central electronic module (CEM) checks the internal components in the control module.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Incorrect hardware has been detected.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Start-up of the control module.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None

Possible source
- Incorrect hardware installed.

Fault symptom[s]
- Turn signals/Front turn signal does not work
- Turn signals/Rear turn signal does not work
- Driving/Poor performance/lacks power
- Instrument- /button lighting/Does not work
- Gauges/Other gauge problems