Fault-Tracing Information

Fault-tracing

Fault-tracing information

Hint: The control module's software has not been started in a correct way. Try to delete the diagnostic trouble code and read it out again to decide if the problem was temporary (intermittent problem).




- Ignition on.
- Erase the diagnostic trouble code (DTC).





Continue - Checking the diagnostic trouble codes (DTCs)

-------------------------------------------------

Checking the diagnostic trouble codes (DTCs)




- Ignition on.
- Wait 1 minute.
- Read off diagnostic trouble codes (DTCs).
If the diagnostic trouble code returns, go to the file manager and download the software again. After downloading the software, repeat fault tracing with new erasure and new reading of diagnostic trouble codes.





Continue - DONE

-------------------------------------------------