Fault-Tracing Information

Fault-tracing BCM-U042861

Fault-tracing information

Hint: The steering wheel angle sensor module (SAS) is initiated when the steering wheel is turned more than 5° in any direction. The diagnostic trouble code (DTC) may be stored if the car has been driven for more than 2 minutes without turning the steering wheel. Ask the customer whether this is the case. Erase the diagnostic trouble code (DTC).

Note! If other diagnostic trouble codes are stored in the control module these must be fault traced first.




- Ignition on.
- Erase the diagnostic trouble code (DTC).





Continue - DONE

-------------------------------------------------